You need to go for temporary edge protection
while working at height. There is a very high risk associated with working from
a height on the different buildings and structures.
There are different ways and means by using
which you can ensure the safety and protection of the workers that work in a
structure and buildings. Such arrangements are temporary in nature. Some of
these kinds of protections are described below.
Modular Black Wall and Incremental Panel
System
In case these structures, there are to be
individual concrete facing elements that are not that high. In most of the
cases, some external system of the scaffold tube along with proper fitting is erected. Moreover, the handrail is raised with
structure. Many people use this type of temporary
edge protection. You have every reason to go for this and use this in your
benefit.
Full Height Panel Wall System
In this type of edge
protection method, there are some push-pull props which are used in front
for supporting the panels. Because of the height of the panel, this kind of
edge protection is not generally required till the height of back fill local to
face reaches within 910mm of top of the said panel. This edge protection method
is only supposed to be installed in this stage.
Wraparound faced slopes with the
external temporary formwork
This type of form work is likely to take the form
of the scaffolding tube as well as fitting with the boards. Some type of small
lifting shutter can also be utilized for forming wraparound faced structures.
No comments:
Post a Comment